[Vpn-help] Shrew Client and ZyWall, part deux

[Zachary Hopkins]

Matthew,

That is correct.  I am using the virtual adapter with a static IP address.

The properties of the virtual adapter follow,
DHCP: No
IP Address: 10.12.1.21
Subnet Mask: 255.255.255.0
Default Gateway: {blank}
DNS Server: 10.12.1.1
WINS Server: 10.12.1.1

--Zachary

mgrooms wrote:
> On Mon, 23 Jun 2008 19:50:31 -0400, Zachary Hopkins
> <zachary.hopkins at gmail.com> wrote:
>   
>> Hello all!
>>
>> I now have the Shrew Soft VPN client connecting to and creating a tunnel
>> with my ZyWall 2 Plus firewall.
>>
>> However, I am not able to access anything through the tunnel (in either
>> direction, remote client to LAN or LAN to remote client).
>>
>> The Shrew client picks up a valid LAN address (10.12.1.21), which I can
>> ping, but I cannot reach my LAN gateway (10.12.1.1) or any of the other
>> computers on my network.  The Shrew client has an include policy of
>> 10.12.1.0/24, WINS and DNS are both set to 10.12.1.1.  I have no DNS
>> suffix and no split DNS.
>>
>> It doesn't look like any of the packets or pings are even making it to
>> the Shrew client, as I cannot see them through the trace log viewer.
>>
>> Any thoughts?
>>
>>     
>
> Zachary,
>
> I assume you are using the virtual adapter mode with auto configuration
> disabled. What address and netmask is being assigned to the virtual
> adapter?
>
> Thanks,
>
> -Matthew
>
>
>   

-- 

============================================================
"The best way to predict the future is to invent it."

zachary.hopkins at gmail.com
http://www.hopkinsprogramming.net