[Vpn-help] Shrew Client and ZyWall, part deux

[mgrooms]

On Mon, 23 Jun 2008 19:50:31 -0400, Zachary Hopkins
<zachary.hopkins at gmail.com> wrote:
> Hello all!
> 
> I now have the Shrew Soft VPN client connecting to and creating a tunnel
> with my ZyWall 2 Plus firewall.
> 
> However, I am not able to access anything through the tunnel (in either
> direction, remote client to LAN or LAN to remote client).
> 
> The Shrew client picks up a valid LAN address (10.12.1.21), which I can
> ping, but I cannot reach my LAN gateway (10.12.1.1) or any of the other
> computers on my network.  The Shrew client has an include policy of
> 10.12.1.0/24, WINS and DNS are both set to 10.12.1.1.  I have no DNS
> suffix and no split DNS.
> 
> It doesn't look like any of the packets or pings are even making it to
> the Shrew client, as I cannot see them through the trace log viewer.
> 
> Any thoughts?
> 

Zachary,

I assume you are using the virtual adapter mode with auto configuration
disabled. What address and netmask is being assigned to the virtual
adapter?

Thanks,

-Matthew