[Vpn-help] 2.1.1 Problems on Vista

[Marc Goldburg]

Matthew,

My initial suspicion is always pilot error -- even/especially when it's 
me -- and so I have double-checked the config.  I'll do it again, however.

It may not be relevant, but I'm running different releases of the client 
on the two machines.  The XP machine is running Shrew 2.0.3 and the 
Vista machine is running 2.1.1. 

Marc

Matthew Grooms wrote:
> Marc Goldburg wrote:
>> Matthew,
>>  
>> Your hunch about the USB adapter was correct.  I disabled it and was 
>> able to make more progress using the wired ethernet interface.
>>  
>> At this point, phase 1 successfully completes, but phase 2 fails.  
>> I've included output from the VPN trace tool and also ifconfig output 
>> following phase 1 completion.  I am able to connect with the Shrew 
>> client on an XP machine on the same subnet at the same time.
>>  
>> Thanks for looking at this.
>>  
>
> Marc,
>
> Your log output shows a failure during Xauth. I have no idea why this 
> would work on XP and not on Vista. Its the same code running on both 
> platforms :) Are you sure you are using exactly the same configuration 
> in both instances? Are you using the same username and password during 
> authentication?
>
> Thanks,
>
> -Matthew
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20080908/5df1e8c4/attachment-0002.html>