[Vpn-help] Cisco PIX Security Appliance Software Version 8.0(4) and Shrew Soft VPN Client 2.2.x
Jorge Novo
jnovonj at gmail.com
Mon Apr 20 10:08:10 CDT 2009
Hi,
Client configuration between PIX 8.0(4) and Soft VPN Client can be
done with this HOWTO:
http://www.shrew.net/support/wiki/HowtoCiscoAsa
or
http://www.shrew.net/support/wiki/HowtoCiscoPix
But this HOWTOs are using:
"The client uses the tunnel group name as its FQDN identity value and
the tunnel group pre-shared-key as its pre-shared key value"
A better configuration could be done by using usernames inside the
tunnel-group, something like this:
username jnovonj password **************** encrypted
username jnovonj attributes
vpn-framed-ip-address 192.168.5.1 255.255.255.0
tunnel-group TunnelGroupSCC type remote-access
tunnel-group TunnelGroupSCC general-attributes
address-pool VPN_Pool
tunnel-group TunnelGroupSCC ipsec-attributes
pre-shared-key *
How is possible to do with Shrew Soft VPN Client?
---
SALUDE3.
http://www.rodeiroag.es/
http://soloeningles.blogspot.com/
Arnold Schwarzenegger - "I have a love interest in every one of my
films - a gun."
More information about the vpn-help
mailing list