[vpn-help] Bidirectional VPN shrewsoft client <> netscreen

[VPN Client Product Support]

Thanks - I'll give it a go today. So what I was  attempting was not possible
with Shrewsoft client alone?

Cheers,

Ben

On Thu, Dec 17, 2009 at 2:22 AM, VPN Client Product Support <
vpn-help at lists.shrew.net> wrote:

> Ben,
>
> Since this is not related to Shrew I'm emailing you directly. Have a look
> at pfSense for setting up a gate-to-gate VPN tunnel. You can use IPSec or
> OpenSSL.
>
> Best,
>
> Frank Pikelner
>
> On 2009-12-16, at 6:29 PM, "VPN Client Product Support" <
> vpn-help at lists.shrew.net> wrote:
>
> Hi,
>
> I have used the shrewsoft client for a while, and have succesfully
> configured it to connect to a netscreen VPN endpoin (ns5gt running screenOS
> 5.40r8.0)
>
> I am now trying to set up a bidirectional VPN such that not only can I see
> the LAN to which the netscreen is connected, but machines on that LAN can
> see my machine. After much trying myself, looking at routing policies and
> the like, I have not got very far. I also looked at the shrewsoft config
> guide here:
>
> <http://www.shrew.net/support/wiki/HowtoJuniperSsg>
> http://www.shrew.net/support/wiki/HowtoJuniperSsg
>
> Which seemed to mirror pretty closely what I had already, but only dealt
> with inbound traffic from the remote client.
>
> Is there a way to acheive what I am attempting, and if so is there any
> information I could provide that would better help diagnose the problem I am
> having?
>
> Cheers,
>
> Ben
>
> _______________________________________________
>
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>
>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20091217/e1e239e2/attachment-0002.html>