[vpn-help] Bidirectional VPN shrewsoft client <> netscreen

[VPN Client Product Support]

Ben,

Since this is not related to Shrew I'm emailing you directly. Have a  
look at pfSense for setting up a gate-to-gate VPN tunnel. You can use  
IPSec or OpenSSL.

Best,

Frank Pikelner

On 2009-12-16, at 6:29 PM, "VPN Client Product Support" <vpn-help at lists.shrew.net 
 > wrote:

> Hi,
>
> I have used the shrewsoft client for a while, and have succesfully  
> configured it to connect to a netscreen VPN endpoin (ns5gt running  
> screenOS 5.40r8.0)
>
> I am now trying to set up a bidirectional VPN such that not only can  
> I see the LAN to which the netscreen is connected, but machines on  
> that LAN can see my machine. After much trying myself, looking at  
> routing policies and the like, I have not got very far. I also  
> looked at the shrewsoft config guide here:
>
> http://www.shrew.net/support/wiki/HowtoJuniperSsg
>
> Which seemed to mirror pretty closely what I had already, but only  
> dealt with inbound traffic from the remote client.
>
> Is there a way to acheive what I am attempting, and if so is there  
> any information I could provide that would better help diagnose the  
> problem I am having?
>
> Cheers,
>
> Ben
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20091216/ad0a9dec/attachment-0002.html>