[vpn-help] 2.1.6-beta3 - cannot sleep while tunnel active

Stuart Hall stuart at daern.org
Wed Dec 30 10:43:52 CST 2009


Not very useful, but "me too". I have to make sure that I always
disconnect before sleeping (I rarely "shutdown" my laptop) otherwise
it freezes and dies, usually with a "driver did not respond to sleep
request" type of error.

This is a new problem since the updated driver code was introduced.
The previous version merely BSODed about 1 time in 4 suspends.

Progress? I reckon so ;-)

SH

On Wed, Dec 30, 2009 at 8:47 AM, Ip <v_ip97 at yahoo.com> wrote:
> Hi,
>
> Thanks very much to the support of this list, I have successfully connected
> to our Cisco gateway with advice from this thread:
>
> http://lists.shrew.net/pipermail/vpn-help/2009-December/002572.html
>
> I did not use the workaround of a single include as in issue#1, so probably
> it was #2 or #3 which fixed our issues. I just import our pcf without any
> modification, so it would not be #4.
>
> However, I noticed a small problem- my notebook running Windows 7 Pro 64-bit
> cannot sleep while the tunnel is active. The screen became blank, all keys
> have no response (except caps lock which lit up the CAPS LED), power LED did
> not indicate sleep, hard disk LED keep flashing occasionally.
>
> Need to long press power button to shutdown and reboot to exit this state.
>
> Cannot test other versions as 2.1.6-beta3 is the first one that works.
>
> Please let me know if you need further info.
>
> Thanks...Ip
>
>
>
>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>
>



More information about the vpn-help mailing list