[vpn-help] 2.1.6-beta3 - cannot sleep while tunnel active

[Ip]

Hi,

Thanks very much to the support of this list, I have successfully connected to our Cisco gateway with advice from this thread:

http://lists.shrew.net/pipermail/vpn-help/2009-December/002572.html

I did not use the workaround of a single include as in issue#1, so probably it was #2 or #3 which fixed our issues. I just import our pcf without any modification, so it would not be #4.

However, I noticed a small problem- my notebook running Windows 7 Pro 64-bit cannot sleep while the tunnel is active. The screen became blank, all keys have no response (except caps lock which lit up the CAPS LED), power LED did not indicate sleep, hard disk LED keep flashing occasionally.

Need to long press power button to shutdown and reboot to exit this state.

Cannot test other versions as 2.1.6-beta3 is the first one that works.

Please let me know if you need further info.

Thanks...Ip


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20091230/90db4a0e/attachment-0001.html>