[Vpn-help] Can not import pcf file

[Shane Smith]

Here is the trace log. One thing I have noticed though, if I run either the
Trace program or the client as administrator, it does not disconnect but it
still does not let any traffic through. Either to our network that we are
VPN'ing to or to the WWW.

-----Original Message-----
From: Matthew Grooms [mailto:mgrooms at shrew.net] 
Sent: Monday, September 14, 2009 1:55 AM
To: Shane Smith
Cc: vpn-help at lists.shrew.net
Subject: Re: [Vpn-help] Can not import pcf file

Shane Smith wrote:
> I am having the exact problem you are with the same VPN appliance series.
I
> have tried 2.1.4 and 2.1.5 RC3. It connects, gets our banner, then can't
> connect to anything. After about a minute I get the "Gateway is not
> responding" error and it disconnects.
> 

This typically means phase2 can't be established. You may also want to 
try the cisco-udp NAT-T option which may be required by some gateways.

Hope this helps,

-Matthew
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: vpn_trace.txt
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20090914/7c4b279c/attachment-0002.txt>