[vpn-help] setup shrew -> netgear fvs318v3 VPN

[Derek Reihe]

Update:

Am connecting now, (by setting auto config to disabled and putting in my own
settings)
tunnel gets established, but cannot send any information through the tunnel,
pings/telnet/ect. bounce.

trace keeps spitting out:
==>local ip address==> --> ==>WAN address<== resend 1 phase2packet

then after 3 retries:
resend limit exceeded for phase2 exchange

I've tried auto, and the combination of settings in the router for the
phase2 tab, also enabled/disabled pfs and compression, no dice.

ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20100427/088b1b64/attachment-0002.html>