[vpn-help] ikea on Ubuntu doesn't work using the same config as on WinXP

[Matthew Grooms]

On 8/31/2010 1:37 PM, Marco Lechner wrote:
> Hi I'm using ShrewSoft VPN Clientto connect to our office intranet. The
> connection woks without problems using 2.1.6 on WinXP (worked also with
> 2.1.4).
> But when I use the same machine HP Compaq 6910p booting with Ubuntu
> (10.04 using ) having iked (running) and ikea version 2.1.5 (standard
> repo) installed it doesn't work. I imported the config from the WinXP so
> it shouldn't be a problem with configuration itself.
> On Linux the connection is established, but I can't ping anything
> besides my own IP (tap0) and the "Remote Host"
>
> The connection messages look good:
> config loaded for site 'a.dent.vpn'
> attached to key daemon ...
> peer configured
> iskamp proposal configured
> esp proposal configured
> ipcomp proposal configured
> client configured
> local id configured
> remote id configured
> pre-shared key configured
> bringing up tunnel ...
> network device configured
> tunnel enabled
>
> Any ides how to find out what's the problem?

Have a look at this.

http://lists.shrew.net/mailman/htdig/vpn-help/2008-November/001827.html

-Matthew