[vpn-help] ikea on Ubuntu doesn't work using the same config as on WinXP

[Marco Lechner]

Am 31.08.2010 21:15, schrieb Matthew Grooms:
> On 8/31/2010 1:37 PM, Marco Lechner wrote:
>> Hi I'm using ShrewSoft VPN Clientto connect to our office intranet. The
>> connection woks without problems using 2.1.6 on WinXP (worked also with
>> 2.1.4).
>> But when I use the same machine HP Compaq 6910p booting with Ubuntu
>> (10.04 using ) having iked (running) and ikea version 2.1.5 (standard
>> repo) installed it doesn't work. I imported the config from the WinXP so
>> it shouldn't be a problem with configuration itself.
>> On Linux the connection is established, but I can't ping anything
>> besides my own IP (tap0) and the "Remote Host"
>>
>> The connection messages look good:
>> config loaded for site 'a.dent.vpn'
>> attached to key daemon ...
>> peer configured
>> iskamp proposal configured
>> esp proposal configured
>> ipcomp proposal configured
>> client configured
>> local id configured
>> remote id configured
>> pre-shared key configured
>> bringing up tunnel ...
>> network device configured
>> tunnel enabled
>>
>> Any ides how to find out what's the problem?
> 
> Have a look at this.
> 
> http://lists.shrew.net/mailman/htdig/vpn-help/2008-November/001827.html
> 
> -Matthew

THat fixed it exactly, thnx.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: marco_lechner.vcf
Type: text/x-vcard
Size: 325 bytes
Desc: not available
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20100831/0fdcf9d6/attachment-0002.vcf>