[vpn-help] Using VPN Trace utility

[Mike Parsons]

Yes--

I have been running the trace utility as administrator.  Please see my
earlier response on this matter.

Mike Parsons -- CISSP, IAM, IEM
Chief Technical Officer
mike.parsons at mynetwiz.com
cell:    336-403-9710 
office:  336-306-5573 

Information security architecture and consulting 
Risk assessment
Compliance readiness assessment
Design and implementation services 
JNCIA -- Firewalls, SSL/VPN, IDP 
JNSS -- UAC, Security, Routers, DX 
Ironport, Bluecoat and Tipping Point certified 
Graduate Certificate in Information Security and Privacy 
Security+
MCP 
www.mynetwiz.com
******************************************************* 
Managing information risk through the application of sound technology 
If you know me, you can trust me.

Galatians 2:20 


-----Original Message-----
From: Bruijne, Mark de [mailto:mark.de.bruijne at capgemini.com] 
Sent: Thursday, February 11, 2010 12:55 PM
To: Mike Parsons
Cc: vpn-help at lists.shrew.net
Subject: RE: [vpn-help] Using VPN Trace utility

Mike,

Do you run the Trace Utility as administrator? If you don't, no data will be
logged ... in my case then.

Start -> All Programs -> ShrewSoft VPN client -> right click "Trace Utility"
-> Run as administrator

Regards,
Mark

-----Original Message-----
From: vpn-help-bounces at lists.shrew.net
[mailto:vpn-help-bounces at lists.shrew.net] On Behalf Of Lukasz Sokol
Sent: donderdag 11 februari 2010 18:07
To: Mike Parsons
Cc: vpn-help at lists.shrew.net
Subject: Re: [vpn-help] Using VPN Trace utility

Hi Mike,
have you clicked on the 'play' button on the appropriate tabs - it seems to
be 
controlling the Shrew IKE and other daemons ? (I may be wrong tho)
Especially, if you have changed the log level from none to another (in
Options)

Also the trace log should be pressed-in. 
So to re-cap, when I start Shrew Trace, I look to click on
Open Log, Trace Log and make sure the > button is on too.

Lukasz



On 11/02/2010 16:34, Mike Parsons wrote:
> Just tried it again--
> 
> Still no data being logged.
> 
> Is there a setting hidden somewhere in the client for file direction?
> 
> Thanks.
> 
> Mike Parsons -- CISSP, IAM, IEM
> Chief Technical Officer
> mike.parsons at mynetwiz.com
> cell:    336-403-9710 
> office:  336-306-5573 
> 
> Information security architecture and consulting 
> Risk assessment
> Compliance readiness assessment
> Design and implementation services 
> JNCIA -- Firewalls, SSL/VPN, IDP 
> JNSS -- UAC, Security, Routers, DX 
> Ironport, Bluecoat and Tipping Point certified 
> Graduate Certificate in Information Security and Privacy 
> Security+
> MCP 
> www.mynetwiz.com
> ******************************************************* 
> Managing information risk through the application of sound technology 
> If you know me, you can trust me.
> 
> Galatians 2:20 
> 
> 
> -----Original Message-----
> From: Mike Parsons [mailto:mike.parsons at mynetwiz.com] 
> Sent: Thursday, February 11, 2010 11:29 AM
> To: 'Lukasz Sokol'; 'vpn-help at lists.shrew.net'
> Subject: RE: [vpn-help] Using VPN Trace utility
> 
> Thanks, Lukasz--
> 
> You're referring to the open log button I assume and not the trace log?
> What is the trace log ubutton used for?
> 
> Why aren't log files showing up in the shrew soft directory under the
debug
> folder?
> 
> Thanks in advance.
> 
> Mike Parsons -- CISSP, IAM, IEM
> Chief Technical Officer
> mike.parsons at mynetwiz.com
> cell:    336-403-9710 
> office:  336-306-5573 
> 
> Information security architecture and consulting 
> Risk assessment
> Compliance readiness assessment
> Design and implementation services 
> JNCIA -- Firewalls, SSL/VPN, IDP 
> JNSS -- UAC, Security, Routers, DX 
> Ironport, Bluecoat and Tipping Point certified 
> Graduate Certificate in Information Security and Privacy 
> Security+
> MCP 
> www.mynetwiz.com
> ******************************************************* 
> Managing information risk through the application of sound technology 
> If you know me, you can trust me.
> 
> Galatians 2:20 
> 
> -----Original Message-----
> From: Lukasz Sokol [mailto:el.es.cr at googlemail.com] 
> Sent: Thursday, February 11, 2010 11:22 AM
> To: Mike Parsons
> Subject: Re: [vpn-help] Using VPN Trace utility
> 
> Hello Mike,
> 
> On 11/02/2010 15:57, Mike Parsons wrote:
>> Hello-
>>
>>  
>>
>> I am trying to debug a vpn client connect issue using Shrew Soft 2.1.5 on
>> windows 7 and connecting to a Juniper SSG
>>
>>  
>>
>> I started the VPN trace application and then attempted top connect to the
>> SSG.  No output showed up in any of the VPN trace application tabs nor
did
>> anything show up in the log files of the client.
>>
>>  
>>
>> Any thoughts?
>>
> 
> When you start Shrew Trace Utility, you need to go to File -> Options,
>  there select Log Output Level (I select Informational), click OK,
> then in the main window click on Open Log button in each tab.
> (ver 2.1.5 had it so)
> 
> Lukasz
> 
> 

_______________________________________________
vpn-help mailing list
vpn-help at lists.shrew.net
http://lists.shrew.net/mailman/listinfo/vpn-help






This message contains information that may be privileged or confidential and
is the property of the Capgemini Group. It is 
intended only for the person to whom it is addressed. If you are not the
intended recipient, you are not authorized to 
read, print, retain, copy, disseminate, distribute, or use this message or
any part thereof. If you receive this message 
in error, please notify the sender immediately and delete all copies of this
message.