[vpn-help] Netgear FVG318

[Alexis La Goutte]

Hi Michal

What bug are you talking ?

Because the bug is only with ModeConfig On and Xauth Off
It is possible to use Netgear product with Shrew VPN when ModeConfig OFF and
Xauth OFF.

Regards

2010/6/1 Michał Węgrzyn <Michal at comfortel.pl>

>  Hi,
>
> No it won't work due to bug in all NetGear products (bug in VPN - wrong
> messages are sent).
> Only ModeConfig+XAUTH works with Shrew.
> If you have NetScreen Remote (NetGear OEM VPN client) it will work with
> FVG318.
>
> Regards,
>  Michal Wegrzyn
>
> ----- Original Message -----
> *From:* Tilman <tilman78 at gmx.de>
> *To:* vpn-help at lists.shrew.net
> *Sent:* Monday, May 31, 2010 10:45 PM
> *Subject:* Re: [vpn-help] Netgear FVG318
>
> Mike, thank you for taking the time to reply. I assume the Netgear FVG318
> is the cheap brother of the FVS318. The FVG318 does neither support mode
> config nor xauth. The admin settings of the FVG318 don't show these options.
>
> Is it possible to use the shrew client with a VPN gateway that doesn't have
> mode config and xauth?
>
> Tilman
>
>
> ----------------------
> From: mikelupo at aol.com [mailto:mikelupo at aol.com]
> Sent: Friday, May 14, 2010 7:55 PM
> To: tilman78 at gmx.de; vpn-help at lists.shrew.net
> Subject: Re: [vpn-help] Netgear FVG318
>
> Did you ever get a reply?
> You MUST use mode config with the shrew client and FVS318. I just set one
> up this past week.
> Make sure that the mode config IP address that's assigned is not the same
> subnet as the VPN router's internal LAN address.
> For example, if you use 192.168.1.1 as the VPN LAN gateway address, then
> make sure your assigned IP addresses by mode-config are something like
> 192.168.2.x
>
> You must also use XAUTH. Setting it up was very straightforward. Sorry I
> can't recall the steps at the moment but I did read about it in the howto
> section of the the shrew.net website.
>
> Hope this helps!
> Mike
>
>
>
>
> -----Original Message-----
> From: Tilman <tilman78 at gmx.de>
> To: vpn-help at lists.shrew.net
> Sent: Wed, May 12, 2010 8:16 am
> Subject: [vpn-help] Netgear FVG318
> Thank you very much for providing this VPN client!
>
>
>
> I have a Netgear FVG318. I hope I have done my homework .. I searched the
> list
>
> archive, there was only one unanswered email about this device.
>
>
>
> Has some successfully connected to this Netgear gateway? The HowToNetgear
>
> article http://www.shrew.net/support/wiki/HowtoNetgear is for other
> Netgear VPN
>
> Gateways that support Mode Config. The FVG318 does not have a Mode Config
>
> option.
>
>
>
> Trying to connect to this gateway the device is logging as final error:
>
> Invalid exchange type 6
>
>
>
> Google-researching it seems that this message has to do with Mode Config. I
>
>
> found this email from 2006, mentioning how to make sure not to use any Mode
>
>
> Config features with the Shrew Client:
>
> http://lists.shrew.net/pipermail/vpn-help/2006-October/000610.html
>
>
>
> I tried disabling all these, but am still getting the same error message on
> the
>
> gateway.
>
>
>
> Any advice on how (and if it is possible at all) to connect to the FVG318
> would
>
> be appreciated!
>
>
>
> Thanks,
>
> Tilman
>
>
>
> --
>
> GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
>
> Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01
>
> _______________________________________________
>
> vpn-help mailing list
>
> vpn-help at lists.shrew.net
>
> http://lists.shrew.net/mailman/listinfo/vpn-help
>
>
>
>
> --
> GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
> Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>
>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20100601/7d3ff5b3/attachment-0002.html>