[vpn-help] Windows Client 2.1.7 and Linksys BEFSX41

[Alexander Coers]

Hi,

Am 28.04.2011 um 04:57 schrieb kevin vpn:
> ...
>> 12:48:25 ii : resend limit exceeded for phase2 exchange
> 
> Hi Alexander,
> 
> The connection is failing in the phase2 exchange process.  You'll need
> to double-check your settings on the gateway and in the client.
> Posting the log from the gateway could help us debug things for you.
> 
> You could try disabling PFS to simplify things a little bit


I disabled PFS, but the result is the same.
Here is the log from the router:

[09/May/11 21:07:05] @sys WAN(PPPoE) IP is 62.226.52.249[09/May/11 21:09:11] @sys Get current time from NTP server : May 09 2011 Mon. 21:09:11[09/May/11 21:10:33] @in UDP from 85.22.14.23:500 to 62.226.52.249:500
[09/May/11 21:10:33]  IKE[6] Rx << MM_I1 : 85.22.14.23  SA, VID, VID, VID, VID
[09/May/11 21:10:33]  IKE[6] Tx >> MM_R1 : 85.22.14.23 SA
[09/May/11 21:10:33]  IKE[6] ISAKMP SA CKI=[b8d1581b 4cea1bab] CKR=[1cf5e5d0 1f2e0499] 
[09/May/11 21:10:33]  IKE[6] ISAKMP SA  DES  /  MD5  / PreShared / MODP_768  / 3600 sec (*0 sec) 
[09/May/11 21:10:34]  IKE[6] Rx << MM_I2 : 85.22.14.23  KE, NONCE
[09/May/11 21:10:34]  IKE[6] Tx >> MM_R2 : 85.22.14.23 KE, NONCE
[09/May/11 21:10:35]     This connection request matches tunnel 1 setting ! 
[09/May/11 21:10:35]  IKE[1] Rx << MM_I3 : 85.22.14.23  ID, HASH
[09/May/11 21:10:35]  IKE[1] Tx >> MM_R3 : 85.22.14.23 ID, HASH
[09/May/11 21:13:17] @sys WAN(PPPoE) IP is 62.226.47.244[09/May/11 21:14:08] @sys Get current time from NTP server : May 09 2011 Mon. 21:14:08[09/May/11 21:14:51] @in TCP from 85.22.14.23:59699 to 192.168.6.200:22


Regards, 
 Alexander