[vpn-help] Help with vpn client connecting to Symantec SGS 440

[Matthew Grooms]

On 5/8/2011 4:50 PM, VINCE P CARTER wrote:
> Has anyone had any experience using the Shrew Soft vpn client (2.1.7)
> with a Symantec SGS 440 gateway? The Symantec client is not compatible
> with Windows 7, and so I have successfully installed the Shrew soft vpn
> client (64-bit OS), but I can't seem to get the client to connect to the
> gateway. I get the following when I try to connect:
>
> config loaded for site 'nnn.nnn.nnn.nnn'
> configuring client settings ...
> attached to key daemon ...
> peer configured
> iskamp proposal configured
> esp proposal configured
> client configured
> local id configured
> remote id configured
> pre-shared key configured
> bringing up tunnel ...
> negotiation timout occurred
> tunnel disabled
> detached from key daemon ...
>
> I suspect it is failing on the Phase1 authentication, but I am not sure
> what parameters it is looking for. Any thoughts?
>

Have a look at the debug log output ...

http://www.shrew.net/support/wiki/BugReportVpnWindows

-Matthew