[vpn-help] Inappropriate DNS changing in Win7

[Stanislav Datskevich]

16.05.2011 22:03, Matthew Grooms пишет:
> On 5/12/2011 1:30 PM, Stanislav Datskevich wrote:
>> Problem:
>> I'm using ShrewSoft VPN Client version 2.1.7 in Windows 7 to connect to
>> Juniper SRX 210 firewall. The connection is successfully, but vpn client
>> erases all the DNS-servers in my existing network connection.
>> DNS-servers are turned back when I disconnect vpn. Now I using a
>> workaround - I added my DNS-servers manually to vpn config.
>>
>> I propose to change the VPN client so that it does not interfere in
>> setting DNS, if you uncheck "Enable DNS ".
>>
>> To reproduce:
>> Connect from Windows 7 (use manually added DNS-servers on your network
>> connection) to any Juniper SRX with dial-in vpn using attached config
>> (or same).
>>
>> VPN Client version = 2.1.7
>> Windows OS Version = Windows 7 32-bit with service pack 1
>> Gateway Make/Model = Juniper SRX 210
>>
>
> Looks like your using direct adapter mode. That doesn't get tested as
> often. Is your IP address statically configured or are you using DHCP?
> I'll a note for checking into this in the todo list.
>
> -Matthew
My address is statically configured.
If you want to reproduce this bug, use Win7, Shrew VPN with attached in 
my first message config with any Juniper SRX.
If you haven't one, I can create test dial-in VPN on my juniper for you.