[vpn-help] Problem with tunnel from Shrewsoft Client to Juniper NS 5GT

[Christian Krackowizer]

Hi,

Screen OS 5.4.0.r8 is such as old so I suggest you upgrade the NS first.

Regards
Christian Krackowizer
 
> -----Ursprüngliche Nachricht-----
> Von: vpn-help-bounces at lists.shrew.net [mailto:vpn-help-
> bounces at lists.shrew.net] Im Auftrag von Johan Schröder
> Gesendet: Samstag, 15. Oktober 2011 13:39
> An: vpn-help at lists.shrew.net
> Betreff: *****POSSIBLE SPAM***** [vpn-help] Problem with tunnel from
> Shrewsoft Client to Juniper NS 5GT
> 
> Hello there,
> 
> I've a problem with a VPN tunnel using the Shrewsoft VPN-Client (current
> windows version) and a Juniper Netscreen 5GT (OS 5.4.0.r8) on a WIndows
> 7 system. I've configured the client and the gateway as described at
> http://www.shrew.net/support/wiki/HowtoJuniperSsg.
> 
> The tunnel established without problems and my client gets an local IP
> address from the right IP Pool on the netscreen. The problem is that no
> machine in the VPN LAN could be reached, not even a ping. Only a ping to
> my machine and to the gateway (Netscreen) IP address is successfully.
> 
> When I try ipconfig /all, I get these values
> 
>   IPv4 address  . . . . . . . . . . : 192.168.0.240(Vorläufig)
>   Subnetmaske   . . . . . . . . . . : 255.255.255.255
>   Default gateway . . . . . . . . . :
> 
> The IP net on the getway side is 192.168.0.0/24.
> 
> It seems to my that there could might be problem, because of the given
> subnetmask (I think it should be /24 and not /32) and there is no
> default gateway assigned.
> 
> Do you have any idea?
> 
> Regards,
> Johnson
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help