[vpn-help] Accessing several networks

[Stéphane PERON]

Hi Tamas,

thanks for you answer but It doesn't not work !!

It only works  for one network ...

I use shrewsoft 2.2 ... and try to connect to a zywall usg 100 ...

When I put  for example, 192.168.1.0/24 as local policy in the zywall ( 
phase 2 ) ... And 192.168.1.0 / 255.255.255.0 in the policy tab .. ..I 
works very well

But if i put a RANGE of ip adresse in the zywall like , 
192.168.1.0-192.168.3.0 ... And try to add 192.168.1.0 / 
255.255.255.0,192.168.2.0 / 255.255.255.0, 192.168.3.0 / 255.255.255.0 
in the policy tab

Il doesn't work !!! I can't contact networks

Any Idea ?

Thanks a lot for your help

Stéphane

Le 18/10/2011 16:14, Uracs Tamás a écrit :
> Hi Stéphane,
>
> specify these networks in the policy tab of the shrew policy.
>
> KR,
>
> Tamas
>
> -----Original Message-----
> From: vpn-help-bounces at lists.shrew.net [mailto:vpn-help-bounces at lists.shrew.net] On Behalf Of Stéphane PERON
> Sent: Tuesday, October 18, 2011 2:55 PM
> To: vpn-help at lists.shrew.net
> Subject: [vpn-help] Accessing several networks
>
> Hi all,
>
> How can I configure Shrewsoft in order to join several networks ?
> for example : 192.168.1.0, 192.168.11.0 and 192.168.15.0
>
> With the greenbow client, I can specify a range of addresses .. How could I do the same in Shrewsoft ?
>
> Thanks for help
>
> Cheers
>
> Stéphane
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>