[vpn-help] Accessing several networks

[Stéphane PERON]

I'd like to add that, for the time being, I have created as much 
shrewsoft connection as there are networks ..
The problem is, that I can't contact all the sub-networks when all 
connections are made ... routing for several VPN connections doesn't work

Le 19/10/2011 09:28, Stéphane PERON a écrit :
> Hi Tamas,
>
> thanks for you answer but It doesn't not work !!
>
> It only works  for one network ...
>
> I use shrewsoft 2.2 ... and try to connect to a zywall usg 100 ...
>
> When I put  for example, 192.168.1.0/24 as local policy in the zywall 
> ( phase 2 ) ... And 192.168.1.0 / 255.255.255.0 in the policy tab .. 
> ..I works very well
>
> But if i put a RANGE of ip adresse in the zywall like , 
> 192.168.1.0-192.168.3.0 ... And try to add 192.168.1.0 / 
> 255.255.255.0,192.168.2.0 / 255.255.255.0, 192.168.3.0 / 255.255.255.0 
> in the policy tab
>
> Il doesn't work !!! I can't contact networks
>
> Any Idea ?
>
> Thanks a lot for your help
>
> Stéphane
>
> Le 18/10/2011 16:14, Uracs Tamás a écrit :
>> Hi Stéphane,
>>
>> specify these networks in the policy tab of the shrew policy.
>>
>> KR,
>>
>> Tamas
>>
>> -----Original Message-----
>> From: vpn-help-bounces at lists.shrew.net 
>> [mailto:vpn-help-bounces at lists.shrew.net] On Behalf Of Stéphane PERON
>> Sent: Tuesday, October 18, 2011 2:55 PM
>> To: vpn-help at lists.shrew.net
>> Subject: [vpn-help] Accessing several networks
>>
>> Hi all,
>>
>> How can I configure Shrewsoft in order to join several networks ?
>> for example : 192.168.1.0, 192.168.11.0 and 192.168.15.0
>>
>> With the greenbow client, I can specify a range of addresses .. How 
>> could I do the same in Shrewsoft ?
>>
>> Thanks for help
>>
>> Cheers
>>
>> Stéphane
>> _______________________________________________
>> vpn-help mailing list
>> vpn-help at lists.shrew.net
>> http://lists.shrew.net/mailman/listinfo/vpn-help
>>
>