[vpn-help] IPSec VPN to NetASQ not working when client inside same network class.

Alexis La Goutte alexis.lagoutte at gmail.com
Sun Dec 30 11:07:02 CST 2012


Hi Jochen,

It is possible to attach your configuration ?
How to your VPN Gateway is configured ? (it is possible to attach a ifinfo
?)

Regards,

On Fri, Dec 28, 2012 at 8:12 AM, Finalbeta <finalbeta at gmail.com> wrote:

> Hello list,****
>
> ** **
>
> I’m facing a problem with the VPN client  (I think it is the client part)
> when my client is inside the same network class. ****
>
> My tested clients are windows 7 or 8.
>
> My company subnet is 10.10.5.0/24 and 10.10.6.0/24****
>
> My clients have no problem when they are inside a class B or C subnet. (So
> clients connecting from 172.16.* or 192.168.* have no problem connecting)*
> ***
>
> The same clients connecting from a local 10.10.*/24 can set up the ipsec
> tunnel to the company, but it times out. I can get no traffic across it.
> After several seconds the client gets disconnected. ****
>
> ** **
>
> I’m using the netasq guide from the wiki. I’ve configured the remote
> networks manually inside the configuration and I am using the local IP
> address on the client. ****
>
> ** **
>
> Thank you****
>
> Jochen (finalbeta at gmail.com)****
>
> ** **
>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20121230/da41e61e/attachment-0002.html>


More information about the vpn-help mailing list