[vpn-help] Cisco ASA-Can't connect to

[Gerd Röthig]

Hello  Tony,

Please create a debug log File. You can achieve this as follows:

- Start the VPN Trace Program.
- On the IKE Tab, stop the IKE Service.
- Enable logging on the File Menu, set logging level to Debug and choose a file for the output.
- Start the IKE service again.
- Try connecting.
- After the error message, quit VPN Client.
- Zip pack the debug output file and post it here.

Kind regards,

Gerd


----- Ursprüngliche Nachricht -----
Von: Tony Verga
Gesendet: 11.02.2013 19:36
An: vpn-help at lists.shrew.net
Betreff: [vpn-help] Cisco ASA-Can't connect to

Hi,
Have a client with Windows 7 64 bit & can't use the Cisco VPN client to connect to ASA.




Here is the message that comes up when trying to connect:





config loaded for site 'Office Connect'
 
configuring client settings ...
 
attached to key daemon ...
 
peer configured
 
iskamp proposal configured
 
esp proposal configured
 
client configured
 
local id configured
 
pre-shared key configured
 
bringing up tunnel ...
 
no dhcp response from gateway
 
tunnel disabled
 
detached from key daemon ...




Any help would be appreciated.  I have look at support docs and varied the settings a bit, still not connecting.


thanks
 

Tony



-- 
Tony Verga
CDS Group, Inc.
8545 N. Black Canyon Highway
Phoenix, AZ 85021
Office 602•242•5101, Fax 602•249•5011
Cell 602•793•9621 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shrew.net/pipermail/vpn-help/attachments/20130212/863875c9/attachment.html>