[vpn-help] Ubuntu 14.04

[Michael FROMENT]

Thanks Jason...
Even if I send a continuous ping on both side of the tunnel I don't see any
traffic :-(

Michael


2014-08-13 22:33 GMT+02:00 Jason Lewis <jlewis at 2co.com>:

>  Michael,
>
>
>
> You may be experiencing the same problem I am.  Try this and see:
>
> 1.       Connect to your VPN
>
> 2.       Immediately start a continuous ping to a system on the other
> side of the tunnel.
>
> 3.       See if the ping works for about 30 seconds then dies.
>
>
>
> I haven’t had  a lot of time to troubleshoot this, but I suspect it has
> something to do with the Linux-specific code.  I could be wrong.
>
>
>
> Jason Lewis
>
> Systems Administrator - *2Checkout* <https://www.2checkout.com/>
>
> ---------------------------------------------------------------------
>
> jlewis at 2co.com
>
> 1.614.921.2450 x127
>
> 1.614. 260.3967 (mobile)
>
>
>
> *From:* vpn-help [mailto:vpn-help-bounces at lists.shrew.net] *On Behalf Of *Michael
> FROMENT
> *Sent:* Wednesday, August 13, 2014 4:26 PM
> *To:* vpn-help at lists.shrew.net
> *Subject:* [vpn-help] Ubuntu 14.04
>
>
>
> Hello,
>
> I've just setup shrew 2.2 on my ubuntu 14.04 and setup a connection to my
> Juniper SSG device (PSK+Xauth).
>
> The tunnel is up, I get the correct route on my device but there is
> absolutely no traffic on my tap device.
>
> The same setup with shrew 2.2 under windows is working.
>
> Do you have an ideas about this issue?
>
> Michael
>  All information in this email is subject to the 2Checkout
> confidentiality statement.
> <https://www.2checkout.com/policies/confidentiality-statement>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20140813/98094764/attachment-0001.html>