[vpn-help] Using Shrewsoft Login Tool With WWAN Connection

Alexis La Goutte alexis.lagoutte at gmail.com
Mon Aug 25 03:10:08 CDT 2014

On Mon, Jun 30, 2014 at 3:54 PM, Mark S. Binkerd <binkerd at glenellyn.org> wrote:
> Support,
> I have the latest professional version of the Shrewsoft client installed
> (2.2) on a Windows 8.1 professional tablet which has a GOBI WWAN card
> installed using Verizon as the carrier.  My endpoint is a Cisco ASA 5505.  I
> can successfully create a VPN tunnel connection between the client and ASA
> when I first login to windows and then establish the tunnel.  When I try to
> use the Shrewsoft  Credential Provider to do a one step login to the VPN and
> domain the process completes successfully and it shows the tunnel
> established but I cannot pass traffic through the tunnel.  I do have
> connectivity to the public network(split tunnel)  but not the tunnel does
> not pass traffic.  If I disconnect and re-establish the tunnel I can then
> pass traffic over the VPN tunnel.  If I turn off the WWAN and turn on WIFI
> the Shrewsoft Credential Provider works correctly and I can pass traffic
> through the VPN tunnel.  Any suggestions?

Hi Mark,

There is some known issue with WWAN driver (NDIS 6.1)
but not yet fixed...
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> https://lists.shrew.net/mailman/listinfo/vpn-help

More information about the vpn-help mailing list