[Vpn-help] windows 7 x64 / netgear FVS-336G / 2.1.5-beta

[Maca Zorova]

I just tried the 2.2.0-alpha as well - same problem as the 2.1.5 beta - reports successful tunnel creation, but unable to access the ips that are behind that tunnel.

I should also mention that when I open the Trace Utility, and trace log, nothing shows up. And the text underneath the Start/Stop and Restart buttons are all grayed out and I am unable to click on those buttons.

mz

--- On Tue, 6/9/09, Maca Zorova <mzorova at yahoo.com> wrote:

> From: Maca Zorova <mzorova at yahoo.com>
> Subject: [Vpn-help] windows 7 x64 / netgear FVS-336G / 2.1.5-beta
> To: vpn-help at lists.shrew.net
> Date: Tuesday, June 9, 2009, 4:55 PM
> 
> Hello, I just installed the 2.1.5-beta-5 and tried using it
> on Windows 7 x64 RC1 and with the netgeat FVS-336G with the
> 3.0.5-25 firmware. I configured it using the EXCELLENT wiki
> page HowToNetgear, and it all worked. In  that I am
> able to dial-in and it says tunnel brought up.. 
> 
> However when I access the IPs behind the VPN
> (192.168.1.xxx) when I am on a public IP, it does not
> resolve. Also, I do not see another network adapter when I
> look at the network adapters on windows 7.. 
> 
> Not sure if I am supposed to see a new network adapter in
> the list when it is installed.. Either way, I am unable to
> access the IPs even though the connection says it is
> successful.. I can provide more detail if that helps?
> 
> mz
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>