[vpn-help] Windows 7 client 2.1.7 and NetGear FVS328 router

[Alexis La Goutte]

Hi Dava,

Did you check the Policy Generation Level Parameter ? (in Policy Tab).

Regards

On Tue, May 17, 2011 at 2:46 AM, David Durgee <dhdurgee at yahoo.com> wrote:

> On Mon May 16 13:07:25 CDT 2011 Matthew Grooms wrote:
>
> >It works in my lab with the settings in the wiki document. I believe
> >some folks on the list have stated there is a problem when modecfg is
> >not used. I have yet to verify this. You should definitely upgrade your
> >router to the latest available firmware. The stock firmware on some
> >devices just won't work.
>
> They are using the latest firmware for the FVS328, which is V1.0.15 and
> dated 12 July 2005.  So what you refer to is unavailable for this hardware.
> I have no control over the hardware as it belongs to a client and they have
> no plans to replace working hardware.
>
> As I noted in my original message I am able to complete the initial phase
> with the 2.1.7
> client but I am unable to open the tunnel.  The NetGear client works fine
> with this router,
> so if that client were Windows 7 compatible I would not even bother to
> consider changing
> clients.  But as it is NOT compatible and they insist on charging to
> upgrade it I am looking
> for an alternative.  Your client appears to be my best hope.  Any help
> appreciated.
>
> Dave
>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20110517/c3eeff92/attachment-0002.html>