[vpn-help] after disconnecting client i lose internet connection

[Kevin VPN]

On 05/09/2012 04:12 PM, Kevin Ulin wrote:
> I am using ShrewSoft VPN Client v2.1.7.
>
> If I connect for more than a few minutes I encounter a problem when I
> eventually disconnect the client. After disconnect I must disable and
> re-enable my local network connection in 64 bit win7. Just performing a
> ipconfig /renew is not enough. I am not sure where to begin troubleshooting
> this any anything I might google is too generic to be useful.
>
> I have installed the VPN client on another machine and not had this problem
> so I know this is abnormal.
>

Hi Kevin,

My first suggestion would be to try the ShrewSoft VPN Client 2.2.0beta2. 
  The 2.2.0 code stream contains a number of changes related to Windows 
7, so it may resolve your issue.

If the problem re-occurs, I'd suggest attaching the output from 
'ipconfig /all' as well as 'route print', taken both when the VPN is 
connected and after you've disconnected (so 4 outputs in total).

You could also include a debug log from Shrew, as described here:
http://www.shrew.net/support/wiki/BugReportVpnWindows