[vpn-help] RV042 VPN works great for multiple clients, clients cannot see / ping each other

[Kevin VPN]

On 10/12/2013 04:07 PM, Jim Harle wrote:
> FWIW I just connected two Shrew 2.2.2 Windows clients to the same
> Cisco ASA gateway, and they could ping/connect to open ports on each
> other's virtual private interfaces as their Windows firewalls would
> allow, so I don't believe any "client-to-client" blockage is inherent
> in the Shrew tunnels.
>
> -----Original Message----- From: vpn-help-bounces at lists.shrew.net
> [mailto:vpn-help-bounces at lists.shrew.net] On Behalf Of Ilan Almog
> Sent: Saturday, October 12, 2013 10:14 AM To:
> vpn-help at lists.shrew.net Subject: [vpn-help] RV042 VPN works great
> for multiple clients, clients cannot see / ping each other
>
> Hello all!
>
> I have been using Shrew to maintain (for a couple of years already)
> a very stable VPN with a Cisco RV042 without any issues after it was
> properly configured.
>
<snip>
> However, no client is able to see / ping another client! I've tried
> several routing configurations under the Policy tab of Shrew, several
> IP/netmask combinations for the clients -- nothing worked.
>
> Is this possible to be done or is there something inherent in the
> way the tunnels are established that clients really cannot see each
> other?
>

Hi Ilan,

I would think it's a policy/rule setting of the RV042 that prevents 
clients from seeing each other, not the Shrew client.