[vpn-help] Issues connecting to company VPN using a "Pocket WiFi - LTE" access point

[Alexis La Goutte]

Hi Guido,

Do you have try to remove some transform (in Phase 2) because there is
a lot of transform (> 40) and there is may be a problem of IP
fragmentation !

Regards,

On Sun, May 4, 2014 at 5:13 AM, Guido 嵬 到 <guido.out at aversano.org> wrote:
> Hi,
>
> I am experiencing problems connecting to my company VPN, using the
> 2.2.2 client on Windows 8.1 / 32bit (imported PCF configuration).
> The connection is established, but no traffic passes through, and I
> get disconnected by the server after a while. If I look at security
> associations in the VPN Trace utility, I can see 2 associations remain
> in LARVAL state, before forced disconnection, and no bytes are
> exchanged. Please see my logs attached for more info.
>
> The problem appears only when I am connected to the internet by a
> Pocket WiFi - LTE cellular access point that I rented in Japan,
> otherwise the client works fine.
> I thought to a NAT/firewall issue with the access point, but note that
> I manage to connect using the same Pocket WiFi access point, but using
> iOS Cisco VPN software embedded in my iPad.
>
> I would really appreciate any help from you all on this issue!
>
> Regards,
> Guido
>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> https://lists.shrew.net/mailman/listinfo/vpn-help
>